Expanded Applications
AMSOIL custom EaAR Filter assemblies are designed for racing
applications. They incorporate good looks and excellent air flow
in addition to the high efficiency afforded by AMSOIL Ea
nanofiber technology. These custom air cleaner assemblies are
designed for use with carbureted engines that use a 14-inch
round element air cleaner housing. AMSOIL EaAR kits provide more
air flow than competing assemblies. The kits feature the common
14-inch diameter carburetor plate, air filter and high air flow
lid along with a two-inch, three-inch, four-inch, five-inch or
six-inch-high filter. Replacement filters, air flow lids and
carburetor plates are also sold separately.
Ea Air
Flow Lids
AMSOIL EaAR Filter kits provide racers with more power through
the new Ea air flow lids. The air flow lids are constructed
using AMSOIL Ea nanofiber media, adding filtration area. They
feature a polished aluminum trim ring with AMSOIL logos etched
on the surface. Not only do the Ea air flow lids add filter
area, they actually redirect air inside the filter to pull in
more air through the side pleats for even greater performance
efficiency.
Advanced
Filtration Technology
AMSOIL EaAR Air Filters are designed to replace stock cellulose,
oil-wetted gauze or foam filters. The nanofibers in EaAR Filter
media have sub-micron diameters and small inter-fiber spaces,
resulting in more contaminants being captured on the surface of
the media. Cellulose, wetted gauze and foam filters are larger
and have larger spaces between the fibers in the media, causing
contaminants to load into the depth of the filter, plugging the
airflow path and resulting in higher restriction than one micron
in diameter, and because of their size, there are more pores per
square-inch (higher pore density), allowing for higher
dirt-holding capacity and lower pressure drop when compared to
traditional filter media. Thinner media fibers, like those in
EaAR Air Filters, produce more uniform pore size distribution,
improving the filter’s overall ability to capture and retain
particles.
Quality
Construction
AMSOIL EaAR Filters’ nanofiber media is pleated with
epoxy-coated wire for additional strength and stiffness. A
high-quality plastisol potting compound is used to ensure filter
media and screen stability while sealing the filter in the air
box. The EaAR filtration system allows air to flow both through
the side of the filter and through the nanofiber media of the
lid, adding more filter area, greater performance and superior
efficiency.
Quick
Cleaning
AMSOIL EaAR Air Filters are cleanable and long lasting. AMSOIL
recommends cleaning EaAR Filters when designated by the
restriction gauge if the vehicle is so equipped, or according to
operating conditions. In dusty conditions or in high-performance
vehicles, more frequent cleaning may be required. EaAR Air
Filters may be cleaned by vacuuming the media on the dirty side
or using low-pressure shop air on the clean side. AMSOIL
recommends cleaning EaAR Filters as conditions dictate.
Consult the below
dimension sheet for applications.
|
AMSOIL# |
Diameter (in.)
|
Height (in.)
|
Description |
|
EaAR2102 |
14" |
2.75" |
Complete Filter Kit
|
|
EaAR2103 |
14" |
3.625" |
Complete Filter Kit
|
|
EaAR2104 |
14" |
4.6875" |
Complete Filter Kit
|
|
EaAR2105 |
14" |
5.6875" |
Complete Filter Kit
|
|
EaAR2106 |
14" |
6.875" |
Complete Filter Kit
|
|
EaAR2140 |
14" |
N/A |
Replacement Base
for Kit |
|
EaAR2141 |
14" |
.875" |
Replacement Lid for Kit
|
|
EaAR2142 |
14" |
2" |
Replacement Filter
for Kit |
|
EaAR2143 |
14" |
3" |
Replacement Filter for Kit
|
|
EaAR2144 |
14" |
4" |
Replacement Filter
for Kit |
|
EaAR2145 |
14" |
5" |
Replacement Filter for Kit
|
|
EaAR2146 |
14" |
6" |
Replacement Filter
for Kit |
|
